D. Edward Mitchell 16:00, 14 April 2020 (UTC) Hello World!    groupKOS Developer Share —usually UNDER CONSTRUCTION

Caduphase.asc from KeelyNet.com

From groupKOS Developer Share
Jump to navigation Jump to search

Dear researcher, please be aware that the terms used below once were buzz words in a quest for free-energy, that afforded a comradery among early online communities in dial-up days.
The focus in this piece of history is the description of the parameters of concern for a 'self-resonant' Caduceus winding with consideration of a resonant spacing between coils.  These coils were not intended for Tempic Field creation as did Wilbert Smith, but were wrapping a ceramic magnet toward free energy production.

The Developer does not support over-unity research in any practicality. Smith's alien science is not at all a cargo cult phenom, but rather is information from an off-world human source that the CIA and Canadian intelligence classified and buried in secrecy in the 1950-s.

Retrieved 20:02, 20 September 2021 (UTC) from http://www.rexresearch.com/smith/caduceus3.htm
KeelyNet.com ( MAY 11, 1994 )

An excerpt from the KeelyNet.com article CADUFAZE.ASC

Caduceus Loop 7 diag.gif
by Joel McClain


From this, we can see that the current which is used to excite a caduceus coil must also be resonant relative to the length of the windings and the amount of crossover capacitance. To determine the appropriate frequency, the volume of the core as well as a resonating chamber must also be taken into account. The core is essentially a resonant cavity, and you need to apply a frequency which will cause it to resonate.

Think of the core as a hollow cylinder, to which you will apply a musical note until it resonates. The core density is irrelevant to resonance, and applies only when considering saturation. [bold mine] Try using an ordinary "tin can", opened on one end, and apply acoustic energy until you reach resonance, and hear the energy "ringing" back at you.

Having determined the resonant frequency of the core, then add the windings as if they were the holes in a flute, with a crossover at each "hole". In other words, even spacing is not going to work. Each crossover needs to be preceded by a length of wire which is calculated based upon the PHI relationship to resonance.

The caduceus coil has to attain aggregate resonance before it can produce an over-unity effect, so each of the seven crossovers is a whole note on the diatonic scale. In other words, use alternate cube and square roots of PHI (1.618) times the length of the previous winding to determine the length of the next winding.

In this way, every winding is both a note as well as a harmonic of another winding.