D. Edward Mitchell 16:00, 14 April 2020 (UTC) Hello World!    groupKOS Developer Share —usually UNDER CONSTRUCTION

Difference between revisions of "Vector Inversion Autotransformer"

From groupKOS Developer Share
Jump to navigation Jump to search
(excerpt)
Line 16: Line 16:
 
[[Blumlein generator|Blumlein]] is also mentioned in Appendix C as sometimes the load of the autotransformer output.
 
[[Blumlein generator|Blumlein]] is also mentioned in Appendix C as sometimes the load of the autotransformer output.
  
'''Source SLAC Report:''' https://www.osti.gov/servlets/purl/4271590
+
===Source SLAC Report:===
;'''Local copy: ''' [[:File:Streamer chamber development SLAC report no. 74 4271590.pdf|''Streamer chamber development'']] SLAC report no. 74, <b><big>June 1976</big></b> 4271590.pdf
+
;: F. Bulos, A. Odian, F. Villa, and D. Yount
 +
:: <b><big>June 1976</big></b>
 +
:: DOI:  10.2172/4271590
 +
:: PDF: <small>https://www.osti.gov/servlets/purl/4271590</small>
  
'''DOI:''' 10.2172/4271590
+
===Local copy===
 +
:: [[:File:Streamer chamber development SLAC report no. 74 4271590.pdf|''Streamer chamber development'']] SLAC report no. 74, <b><big>June 1976</big></b> 4271590.pdf
  
 
==An excerpt of three pages of Appendix C detailing construction==
 
==An excerpt of three pages of Appendix C detailing construction==

Revision as of 19:28, 6 February 2020


A vector inversion autotransformer is detailed in Appendix C of Streamer Chamber Development, 1967 SLAC Report No. 74., Stanford Linear Accelerator Center, Stanford Uni., Standford, California.

This device was built in a study to condition the pulse discharge of a Marx spark-gap generator, which was then feed to a plasma chamber to ignite a two-meter plasma streamer.

This device is ironless. It consists of copper foil (2-5 thousandths), with polyethylene or mylar, also rolled with toilet paper vacuum-impregnated with CuSO4 solution. The layers are wound on a Lucite(R) cylinder.

excerpt

"The copper sulfate* has the important function of distributing the field smoothly at the edges of the copper winding so that breakdown through the insulating sheets does not occur. [...] * The resistivity of the copper sulfate solution should be of the order 104 ohm-cm."


Blumlein is also mentioned in Appendix C as sometimes the load of the autotransformer output.

Source SLAC Report:

F. Bulos, A. Odian, F. Villa, and D. Yount
June 1976
DOI: 10.2172/4271590
PDF: https://www.osti.gov/servlets/purl/4271590

Local copy

Streamer chamber development SLAC report no. 74, June 1976 4271590.pdf

An excerpt of three pages of Appendix C detailing construction