D. Edward Mitchell 16:00, 14 April 2020 (UTC) Hello World!    groupKOS Developer Share —usually UNDER CONSTRUCTION

Difference between revisions of "Vector Inversion Autotransformer"

From groupKOS Developer Share
Jump to navigation Jump to search
(excerpt)
m
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
[[Category: reference]]
 
[[Category: reference]]
 
[[Category: electronic]]
 
[[Category: electronic]]
[[Category: esoterica]]
+
{{indexEsoteric}}
[[Category: vector inversion]]
+
{{indexVectorInversion}}
  
A vector inversion autotransformer is detailed in Appendix C of ''Streamer Chamber Development'', 1967 SLAC Report No. 74., Stanford Linear Accelerator Center, Stanford Uni., Standford, California.
+
<div style="float:right; width:425px; background: lime; padding: 0 1em; margin: .5em 0 0 .5em;">
 +
<b><big>[[:category: Esoterica|Esoteric]] affordance</big></b> [[AI]] suggested similarities:
 +
----
 +
;:: [https://scite.ai/reports/novel-principle-of-transient-high-voltage-zKxkjQ Scite.ai electrical engineering reports]
 +
;:: Matching meaning to &mdash; novel principle of transient high voltage
 +
</div>
 +
 
 +
A vector inversion autotransformer is detailed in Appendix C of ''Streamer Chamber Development'', 1967 SLAC Report No. 74., Stanford Linear Accelerator Center, Stanford Uni., Standford, California. "This is a technical report prepared under contract AT(04-3)-515 for the USAEC, San Francisco Operations Office"
  
 
This device was built in a study to condition the pulse discharge of a Marx spark-gap generator, which was then feed to a plasma chamber to ignite a two-meter plasma ''streamer''.  
 
This device was built in a study to condition the pulse discharge of a Marx spark-gap generator, which was then feed to a plasma chamber to ignite a two-meter plasma ''streamer''.  
Line 10: Line 17:
 
This device is ironless.  It consists of copper foil (2-5 thousandths), with polyethylene or mylar, also rolled with toilet paper vacuum-impregnated with CuSO<sub>4</sub> solution.  The layers are wound on a Lucite(R) cylinder.
 
This device is ironless.  It consists of copper foil (2-5 thousandths), with polyethylene or mylar, also rolled with toilet paper vacuum-impregnated with CuSO<sub>4</sub> solution.  The layers are wound on a Lucite(R) cylinder.
  
===excerpt===
+
 
 +
===excerpts===
 +
;Acknowledgements
 +
"[...] The streamer chamber program carried out by Drs. D. Benaksas and R. Morrison at Stanford has provided us with the reassuring information that it is possible to operate streamer chambers in high magnetic fields and that it is practical to use these chambers in the photon beams produced by electron linacs."
 +
;Appendix C
 
"The copper sulfate* has the important function of distributing the field smoothly at the edges of the copper winding so that breakdown through the insulating sheets does not occur. [...] <sup>*</sup> The resistivity of the copper sulfate solution should be of the order 10<sup>4</sup> ohm-cm."   
 
"The copper sulfate* has the important function of distributing the field smoothly at the edges of the copper winding so that breakdown through the insulating sheets does not occur. [...] <sup>*</sup> The resistivity of the copper sulfate solution should be of the order 10<sup>4</sup> ohm-cm."   
  
  
[[Blumlein generator|Blumlein]] is also mentioned in Appendix C as sometimes the load of the autotransformer output.
+
A [[Blumlein line]] is also mentioned in Appendix C as sometimes the load of the autotransformer output, which is a bank of dielectric storage banks that can be switched to charge in parallel and discharge in series (like the Marx spark-gap pulse generator).
  
 
===Source SLAC Report:===
 
===Source SLAC Report:===

Latest revision as of 13:15, 21 March 2020

Halbach arrays   °   Magnetic gears   °   Flux capacitor   °   UFO Detector   °   Psi Tech

edit template Vector inversion Home   °   Iron-less autotransformer (USAEC)   °   Flux Capacitor Patents (ref)   °   Flux Capacitor Project (Share)   °   Transformer-coupled LC vector inversion generators (PDF)

Esoteric affordance AI suggested similarities:


Scite.ai electrical engineering reports
Matching meaning to — novel principle of transient high voltage

A vector inversion autotransformer is detailed in Appendix C of Streamer Chamber Development, 1967 SLAC Report No. 74., Stanford Linear Accelerator Center, Stanford Uni., Standford, California. "This is a technical report prepared under contract AT(04-3)-515 for the USAEC, San Francisco Operations Office"

This device was built in a study to condition the pulse discharge of a Marx spark-gap generator, which was then feed to a plasma chamber to ignite a two-meter plasma streamer.

This device is ironless. It consists of copper foil (2-5 thousandths), with polyethylene or mylar, also rolled with toilet paper vacuum-impregnated with CuSO4 solution. The layers are wound on a Lucite(R) cylinder.


excerpts

Acknowledgements

"[...] The streamer chamber program carried out by Drs. D. Benaksas and R. Morrison at Stanford has provided us with the reassuring information that it is possible to operate streamer chambers in high magnetic fields and that it is practical to use these chambers in the photon beams produced by electron linacs."

Appendix C

"The copper sulfate* has the important function of distributing the field smoothly at the edges of the copper winding so that breakdown through the insulating sheets does not occur. [...] * The resistivity of the copper sulfate solution should be of the order 104 ohm-cm."


A Blumlein line is also mentioned in Appendix C as sometimes the load of the autotransformer output, which is a bank of dielectric storage banks that can be switched to charge in parallel and discharge in series (like the Marx spark-gap pulse generator).

Source SLAC Report:

F. Bulos, A. Odian, F. Villa, and D. Yount
June 1976
DOI: 10.2172/4271590
PDF: https://www.osti.gov/servlets/purl/4271590

Local copy

Streamer chamber development SLAC report no. 74, June 1976 4271590.pdf

An excerpt of three pages of Appendix C detailing construction